Beyem Neocal Term

BEYEM NEOCAL TERM is a flexible, breathable, through-coloured, fiber-reinforced lime mortar, lightened with natural cork and waterproof, for decorating facades and decorative finishung of ETICS systems. Formulated based on lime, aggregates of selected granulometry and whiteness, water repellents and other organic additives. Troweled, smooth and burnished finishing . Colored. Especially suitable for rehabilitation of historic and/or protected building and decorative finishing of ETICS systems.

Through-coloured decorative coating for facades and SATE systems, lime-based, for new construction and rehabilitation. Water-repellent protection of facades.

Substrates must be clean, compact and free of substances that reduce adhesion such as dust, oil, grease and with no loose material. Substrates must submit an adequate porosity and surface roughness. Uneven areas must be corrected. Dampen substrates with water to cool down if they should be too warm, in case of wind or over absorbent substrates and wait until the thin layer of water disappears. It is a good practice curing with a fine spray of clean water 24 h after application. Curing operation is essential to avoid rapid drying and depends on the degree of porosity and surface absorption. Do not apply on cellular concrete, gypsum-based plasters, paint, metal surfaces, plastic, surface waterproofing products or materials with low mechanical properties.

Mix manually or mechanically BEYEM NEOCAL TERM, with approximately 4,5 l per bag of clean water until a homogeneous, creamy, and lump-free paste is obtained. Let the mix stand 5 minutes before application. To apply with render spray machine, it´s necessary to set the relation water/mortar and pump pressure depending on section and length of hose and climatology conditions. It´s important maintain the variables affecting the properties of the applied mortar (distance to the wall, angle of application and water proportion). Spread the mixed product with a trowel (in case of manual or mechanically application) or project it´s creating cords, leaving an average thickness of 4-6 mm depending on the desired finish. Press to ensure adhesion and expel the air contained in the pores. Smooth with a ruler the applied material to regulate the thickness and smooth the surface. When the product is green (set but not fully hardened) it should be finished using the appropriate tool depending on the desired texture. Time until finishing depends of substrate, temperature and environmental humidity.

BEYEM NEOCAL TERM is packed 20 kg plastic lined paper bags. Storage: when stored unopened in a cool dry place, shelf life is 12 months from date of manufacture.

Tools can be cleaned easily with water before the product hardens. Hardened product can be removed only mechanically.

For further and complete information about the safe use of our product please refer to our latest version of the Safety Data Sheet, which is available upon request. Disposal of the product and packaging must be in accordance with current legislation. This is responsibility of the final product user.